0217-5305-100
Alarm Lens Infant Warmer Heater Assembly.
6600-0815-501
Rear End Cap (light grey) Infant Warmer Heater Assembly.
6600-0842-500
Alarm Light Bracket – unit with HCC serial number Infant Warmer Assembly.
0217-5213-500
Front Reflector End Cap Infant Warmer Assembly.
6600-0378-400
Washer Care Plus Series 3000/4000 Incubator Controller Plate and Motor Mounting Hardware
0217-5212-500
Rear Reflector Cap Infant Warmer Assembly.
0214-1566-500
Wire Harness Socket Bracket Infant Warmer Assembly.
0208-0516-300
Lamp 12V 50W GE EXZ(Q50 MR16/NFL) or GE EXN(Q50 MR16/FL) Infant Warmer Assembly.
6600-0392-400
Hole Plug Infant Warmer Assembly.
6600-0002-300
Insulator Fishpaper Infant Warmer Assembly.
0140-6124-114
Screw 6-32 x 7/8 Infant Warmer Assembly.
6600-0245-850
Humidifier heater kit (includes all parts above except reservoir) Giraffe Incubator Humidifier.
6600-1826-500
Side wall inside latch cover Giraffe Incubator Side Door (East/West)
6600-2384-101
Ohemeda logo label Giraffe Incubator Side Door (East/West)
6600-2382-101
Giraffe logo label Giraffe Incubator Side Door (East/West)
6600-1876-500
Sensor housing cover Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-0120-850
Oxygen sensor kit (2 pcs.) (non rohs) Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-1887-500
Sensor gasket Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-0604-700
Sensor plug assembly Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-1506-700
Sensor housing assembly Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-1838-500
Valve housing top cover Giraffe Incubator Servo Control Oxygen Valve housing
6700-0616-800
Adapter 1/8NPTFx1/8NPTM Giraffe Incubator Servo Control Oxygen Valve housing
6600-1878-500
Expansion chamber cover Giraffe Incubator Servo Control Oxygen PC board
6600-1883-500
Cover gasket Giraffe Incubator Servo Control Oxygen PC board
6600-0873-400
Elbow fitting Giraffe Incubator Expansion Chamber/heatsink vent
6600-1881-500
Vent Giraffe Incubator Expansion Chamber/heatsink vent
6600-1219-400
Washer (thick) Giraffe Incubator Expansion Chamber/heatsink vent
6600-1884-500
Expansion chamber inlet gasket Giraffe Incubator Expansion Chamber/heatsink vent
6600-0233-850
Servo Oxygen PCB Giraffe Incubator Servo Control Oxygen PC board
6600-1820-500
DIN rail bracket Giraffe Incubator Drainage hangers and DIN rail
6600-1869-500
Tank strap (includes both sides) Giraffe Incubator E-Cylinder holder (6600-0836-800)
6600-1845-500
Mount Giraffe Incubator Tubing management arm (6600-0837-800)
6600-1248-400
Damper manifold mount Giraffe Incubator Servo Control Oxygen Valve housing
6600-1836-500
Valve housing Giraffe Incubator Servo Control Oxygen Valve housing
6600-1837-500
Valve housing bottom cover Giraffe Incubator Servo Control Oxygen Valve housing
85731-002
PCB MAX CRT CONTROLLER MAX-1
6600-0042-850
Control/Display PCB assembly 220-240V Servo-controlled Humidifier Controller Assembly
6600-0675-501
Display bezel (light grey) Servo-controlled Humidifier Controller Assembly
6600-0529-400
Wax motor Servo-controlled humidifier Heat Sink and Valve Assembly.
6600-0683-500
Valve housing Servo-controlled humidifier Heat Sink and Valve Assembly.
6600-0693-500
Guide Servo-controlled humidifier Heat Sink and Valve Assembly.
6600-0474-600
Connector drawer plug Servo-controlled humidifier Rails and Mounting Hardware.
0214-1562-510
Plug guard 120V (prior to serial no. HCB) Elevating Base and Stationary Table top.
6600-0818-501
Bed (Series 4000) – light grey Infant Warmer Bed Assembly.
0217-5322-500
Pin Infant Warmer Bed Assembly.
6600-0348-400
O-ring Infant Warmer Model 3500 Bed Assembly
6600-0717-501
Bed support – Units with HCC serial number only (light grey)6600-0717-501 Infant Warmer Bed Assembly.
6000-0005-851
Large bed Infant Warmer X-ray tray assembly.
6600-0287-500
Spacer Infant Warmer Model 3500 Bed Assembly
0202-4004-300
Washer Infant Warmer Model 3500 Bassinet.
6600-0779-201
Drawer lock Infant Warmer Well Baby Bassinet.
0305-5060-300
Foam Mattress Model 2001 and 3300 Infant Warmer Model 3500 Bed Assembly
0217-5221-300
Clear Plastic Bed Support Infant Warmer Bed Assembly except model 3500.
6600-0004-801
Tubing Organizer Panel Model 2001 and 3300 – black Infant Warmer Bed Assembly except model 3500.
6600-0004-858
Tubing Organizer Panel Model 4300 and 4400 – grey Infant Warmer Bed Assembly except model 3500.
6600-0603-401
Support Button – grey Infant Warmer Bedside Assembly.
0217-5291-100
End Bracket (new) – black Infant Warmer Bedside Assembly.
0202-0096-300
Washer Infant Warmer Instrument Shelf.
2032506-001
Speaker Tonoport V2.0 TONOPORT V (V2 with USB).
6600-0252-400
Washer (stationary drawers only) Panda iRes & Giraffe Warmers Rail attachments.
6600-0583-500
Drawer cover (beige) Infant Warmer Rotating drawer assemblies.
0205-0413-535
Piston Infant Warmer Oxygen Yoke and Regulator Assembly 1 – Regulator.
6600-0270-401
Tee Handle Infant Warmer Oxygen Yoke and Regulator Assembly 2 – Manifold Block.
6600-0271-400
Sleeve Infant Warmer Oxygen Yoke and Regulator Assembly 2 – Manifold Block.
6600-0118-850
Yoke Check Valve Kit Infant Warmer Oxygen Yoke and Regulator Assembly 2 – Manifold Block.
6600-0032-300
Washer Infant Warmer Oxygen Yoke and Regulator Assembly 2 – Manifold Block.
0217-5092-535
Cap Infant Warmer I.V. Pole.
6600-0867-500
Black Butyrate Cap Infant Warmer Ventilator Mounting Post.
6700-1260-907
O2 Flowmeter (50psi) Infant Warmer Flowmeter Assembly.
6600-0775-500
Vacuum Slide Bottle Mount Infant Warmer Slide Assembly.
6600-0281-800
Heater Tube 220V 540W (5000/series 4000) Infant Warmer Assembly.
6600-0017-850
100V 540W (model 2001/series 3000 w/HCA or HCC) Infant Warmer Assembly.
2033231-002
Rear Cover EasyOne-CS
2033231-003
Battery Door EasyOne-CS
2033231-004
Keypad EasyOne-CS
M1082946
iCentral 05 Client Basic Level Software HP xw4300 Workstation – iCentral/Mobile Care Server
6600-0384-500
Refresher instruction tray (all plastic tops (beige) Elevating Base and Stationary Pedestal Refresher instruction tray assembly.
6600-0175-600
Switch DPST Elevating Base and Stationary Pedestal Foot pedal.
6600-0720-501
Foot switch cover Elevating Base and Stationary Pedestal Foot pedal.
0217-5359-800
Manifold Assembly Infant Warmer Manifold Assembly.
6600-0018-800
Oxygen Manifold Infant Warmer Oxygen Manifold.
0140-6224-104
Screw 6-32 x .238 Infant Warmer Slide Assembly.
2029282-004
MNL OPR TELEG V6.5 GER Teleguard Manuals.
2029282-007
MNL OPR TELEG V6.5 SWE Teleguard Manuals.
2029282-011
MNL OPR TELEG V6.5 POL Teleguard Manuals.
2029282-012
MNL OPR TELEG BVS V 6.5 ENG UK Teleguard Manuals.
6600-1480-500
Control knob Giraffe Incubator Display Module
6600-1065-400
Power Fail Lens Giraffe Incubator Display Module
6600-1131-500
Display Bezel Giraffe Incubator Display Module
6600-0814-700
Tilt Ball and Screw Assembly Giraffe Incubator Bed
6600-1366-500
Stop Giraffe Incubator Bed
6600-1080-400
O-ring Giraffe Incubator Bed
6600-1313-500
Tilt platform Giraffe Incubator Bed
0202-4520-340
Washer Giraffe Incubator Bed
6600-1009-400
Spring Giraffe Incubator Bed
6600-1043-400
Spring Giraffe Incubator Bed
6600-1107-500
Side wall with porthole cutouts Giraffe OmniBed Bed.
6600-1436-500
Wall hinge snap Giraffe Incubator Lower chassis
6600-1149-500
Side wall hinge Giraffe Incubator Side Door (East/West)
6600-1406-500
Side wall inside latch cover Giraffe OmniBed Bed.
6600-1239-500
Porthole hinge bottom Giraffe Incubator Side Door (East/West)
6600-1403-500
Side wall latch Giraffe Incubator Side Door (East/West)
6600-1429-500
Wall hinge snap post Giraffe Incubator Lower chassis
6600-1026-400
Porthole hinge right (East) spring Giraffe Incubator Side Door (East/West)
6600-1238-500
Porthole door Giraffe Incubator Side Door (East/West)
6600-1246-500
Porthole latch cover Giraffe Incubator Side Door (East/West)
6600-1049-400
O-ring Giraffe Incubator Side Door (East/West)
6600-1050-400
Delrin washer Giraffe Incubator Side Door (East/West)
6600-1305-500
Rear (north) wall mount cover Giraffe OmniBed Side panel (East/west).
6600-1058-400
Spherical bearing block Giraffe OmniBed Canopy.
6600-1396-500
Gasket Giraffe OmniBed Canopy.
6600-1738-500
Fan Giraffe Incubator Upper chassis and heat sink
6600-1211-500
Retaining clip Giraffe Incubator Upper chassis and heat sink
6600-1019-600
Thermostat Giraffe Incubator Upper chassis and heat sink
6600-1778-500
Silicon washer Giraffe Incubator Upper chassis and heat sink
6600-1495-500
Reservoir seal Giraffe Incubator Humidifier.
6600-1183-500
Main bracket Giraffe OmniBed Elevating base.
6600-0712-406
Flat washer Panda iRes & Giraffe Warmers Base assembly.
6600-0285-850
E-base footswitch assembly (new) Giraffe OmniBed Elevating base.
6600-0713-408
Lock washer Panda iRes & Giraffe Warmers Base assembly.
6600-0706-448
Screw. M12 button head Giraffe OmniBed Elevating base.
6600-1186-500
Mounting plate Giraffe OmniBed Elevating base.
6600-1767-500
Lift motor bracket Giraffe OmniBed Uprights and lift rail components.
6600-1383-500
Pinch guard Giraffe OmniBed Uprights and lift rail components.
6600-1451-500
Side roller bracket Giraffe Incubator Dovetail mount DIN rail (6600-0659-803)
6600-1770-500
Roller Giraffe OmniBed Rail End caps.
6600-1496-500
Pin guide Giraffe OmniBed Rail End caps.
6600-1483-500
Bracket Giraffe OmniBed Rail End caps.
6600-1317-500
Spool Giraffe OmniBed Rail End caps.
6600-1749-500
Stepped bushing Giraffe OmniBed Belt channel parts – 2 (lift motor side).
6600-1456-501
Decorative strip (teal) Giraffe OmniBed Lift rail (both sides).
6600-1456-502
Decorative strip (gray) Giraffe OmniBed Lift rail (both sides).
6600-1802-500
Hinge cover Giraffe Incubator Upper chassis and heat sink
6600-0860-400
Washer Giraffe Incubator Lower chassis
6600-1803-500
Right hinge pin Giraffe Incubator Lower chassis
6600-1539-700
Calibration valve assembly (includes gasket) Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-0862-400
Male/female shoulder screw Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-2020-500
Vent screen Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-0271-850
Vent screens (5) Giraffe Incubator Servo Control Oxygen Sensor housing assembly
6600-1069-700
Valve housing wire harness Giraffe Incubator Servo Control Oxygen Valve housing
6600-0256-850
Expansion chamber assembly (includes items 1-6) Giraffe Incubator Expansion Chamber/heatsink vent
6600-0269-850
Ventilator slot & ventilator slot Giraffe Incubator Hood & Compartment Air Probe.
6600-1726-500
I.V. Pole Filler Giraffe Incubator Upper chassis and heat sink
6600-1801-500
Tab washer Giraffe Incubator Upper chassis and heat sink
6600-1853-500
Right door hinge button Giraffe Incubator Lower chassis
6600-2670-100
Hinge mask label Giraffe Incubator Lower chassis
6600-1825-500
Hood latch receptacle Giraffe Incubator Hood latch and wire covers
0402-2003-300
Speed nut Giraffe Incubator Uprights and End caps
6600-1510-700
Calibration fan with harness Giraffe Incubator Servo Control Oxygen Sensor housing assembly
0690-1240-331
P-clamp (under Pluerevac holder) Giraffe Incubator Expansion Chamber/heatsink vent

Buy this part spare, quote availability now.

For express quote availability, shipping cost or specs try our web chat express quote form. We encourage ask for lead time prior your order for accurate delivery time.

For inquiries about hard-to-find medical imaging parts (or locate tested quality spares) and brand new medical supplies in the most advanced brands like Ohmeda, Drager, Medtronic, GE, Siemens, Toshiba, Philips, Kodak, Hitachi amount many others, covering all the modalities of systems for medical imaging diagnostic spares including: X-ray machines, CT machines, X-ray Tubes, MRI machines, coils, Ultrasound machines, transducers/probes, imaging mobile units, mammography machines, C-arm machines, image intensifier, bone densitometers machines, PET machines, CRs, SPECT machines, Nuclear systems, Cath/Angio in top brans as GE, Siemens, Philips, Toshiba/canon, Hitachi, kodak; adittional we have an deep network for spares of electronic boards, all types of cables, power supplies, processor, video cards, servers, medical monitors, etc. call to: +14694581746 or contact page

For spare parts with core exchange: Please ship this returnable part back within the stablished (in quote) calendar days of receipt of your original part shipment. Failure to return the part within 30 calendar days will result in an additional charge.

Meditegic supplies medical imaging technology spare parts and medical supplies with an extensive mature network of +1,200 commercial partners and +500,000 part numbers to support +4,000 customers.

For limited internet bandwidth version visit: Meditegic DB spares
Para envíos en Mexico visite: Meditegic Mexico

0/5 (0 Reviews)

Medical imaging parts specialist and medical supplies.
Meditegic ©2014-2024 - Universal access to healthcare

Postal address: 701N. Int. ste 123-3078, Hidalgo TX, 78557 US.

live chat
Express quote?
Hello 👋 Please provide part number & model of unit for each PN.

Also, must provide Name, Company and Email in order to assign Quote ID.